OEM/ODM China Wireless Mesh Nebulizer - Portable Nebulizer Machine (UN204) – AVAIH

Function: Aerosol therapy of asthma,allergies and other respiratory disorders for hospital and homecare use.
Principle of use: Ultrasonic nebulizer sprayed liquid medication to fog panel by compressing air,and form tiny particles,which flow into the throat through imbibing tube.
Characteristics: Quiet, Easy carry and clean, Have two modes to choose,Can be automatic turn off in 5 or 10minutes. Mesh nebulizer is an ideal product for all the people when they suffering asthma, allergies and other respiratory disorders

Utilize

1.There are 3 working modes: High, Medium, Low. to scroll through modes, press the power button. Press and hold the power button for 5 seconds to initiate automatic cleaning.
2.The LED indicator light turns yellow when the device is charging, green when it is done charging, it will turn green/yellow alternately when the device is in automatic cleaning mode.
3.The device will automatically shut off after the use of 20 minutes.
4.The device comes with a lithium battery built into the unit.
5. The mesh module can be replaced by user.
6.Built-in lithium battery.

How to Use the Nebulizer

Before Use
It is VERY IMPORTANT for hygiene reasons that the device and accessories are cleaned and disinfected before every use.
If the therapy requires that various different liquid be inhaled in succession, ensure that the medicine cup module is rinsed after every use.

How to Use
1.Open the lid of the medicine container, fill with medicine or isotonic saline solution and close the lid. Note: max fill is 10ml , DO NOT overfill.
2.Attach accessories as needed (mouthpiece or mask).
For the mouthpiece, wrap lips around the accessory tightly.
For the mask：place it over both nose and mouth.
3.Press on the power button and select your needed working mode. Note: each mode will take different time to atomize all the liquid. For 5ml:
High Mode : take about ~15 minutes
Medium Mode: take about ~20 minutes
Low Mode : take about~ 30 minutes
4.Press the power button to start the device.
5.The mesh nebulizer is on blue light hows that it is working perfectly.
6.Press the power button again if the device turn off automatically after using 20 minutes.
7. The mesh module (if needed): remove the mesh module by rotating it anticlockwise and install the mesh module by rotating it clockwise, as shown in the previous picture.